diff --git a/README.md b/README.md
index 8196325..245b96f 100644
--- a/README.md
+++ b/README.md
@@ -1,2 +1,41 @@
-# TK2K_EXTENDER
+# TK2000 BUS EXTENDER
 
+## DISCLAIMER
+
+Any use of this project is **under your own responsibility**.
+You will be responsible of checking the correct construction and functionality of your board.
+By using this project You will agree that I cannot be held responsible if it will destroy any of your devices, damage your computer, burn down your house or whatever.
+
+## Introduction
+
+This board is a bus extender for the TK2000 computer, and allows plugging in up to 3 expansion boards into it.
+
+Differently from what happens in the Apple II, the TK2000 does not differentiate between the expansion slots: every connector brings out the same signals, and it's up
+to the boards installed in there to decode the signals appropriately and decide which memory/IO range to use.
+
+![Empty adapter connected to a TK2000 clone](pics/adapter_empty.jpg)
+
+![Adapter with two installed boards](pics/adapter_with_boards.jpg)
+
+
+## Hardware
+
+The board was designed with [KiCad](https://kicad.org/) EDA.
+
+### Bill of Materials
+
+| Component              | Qty | Type / Value                                            | Notes                                                                |
+| ---------------------- | --- | ------------------------------------------------------- | -------------------------------------------------------------------- |
+| P2, P3, P4             |  3  | 50 pin (2x25) female edge connector, 2.54mm pitch       | https://aliexpress.com/item/1005008354411366.html                    |
+| P7                     |  1  | 50 pin (2x25) pin header                                | Optional, debug only                                                 |
+| C1 - C6                |  6  | 10uF/25V+ 1206 MLCC capacitors                          |                                                                      |
+| F1                     |  1  | 1.5A 1812 fuse                                          |                                                                      |
+| F2, F4                 |  2  | 0.5A 1206 fuse                                          |                                                                      |
+| F3                     |  1  | 0.25A 1206 fuse                                         |                                                                      |
+
+Bridge JP1, JP2, JP3 and JP4 to connect the DMA and IRQ passthrough chains.
+
+### Ordering the boards
+
+You can order the board for this project at [PCBWay](https://www.pcbway.com/project/shareproject/TODO.html) and support me or download 
+the gerbers and have them printed wherever you like!!!
diff --git a/pics/adapter_empty.jpg b/pics/adapter_empty.jpg
new file mode 100644
index 0000000..fd75f04
Binary files /dev/null and b/pics/adapter_empty.jpg differ
diff --git a/pics/adapter_with_boards.jpg b/pics/adapter_with_boards.jpg
new file mode 100644
index 0000000..25d2b18
Binary files /dev/null and b/pics/adapter_with_boards.jpg differ