#ifndef _DISK2_HEADER_
#define _DISK2_HEADER_

#include <stdint.h>

#define DII_MAX_TRACK	96
#define DECODING_MAPPING_TABLE_DEFAULT_ADDRESS	0x0356
#define ENCODING_MAPPING_TABLE_DEFAULT_ADDRESS	0x9D56
#define WRITE_SIXES_BUFFER_DEFAULT_ADDRESS	0x9C00
#define WRITE_TWOS_BUFFER_DEFAULT_ADDRESS	0x9D00

void dii_generate_6bit_decoding_mapping_table(uint8_t* dest);
void dii_generate_6bit_encoding_mapping_table(uint8_t* dest);
void dii_encode_gcr62_data(uint8_t *src, uint8_t* dest6, uint8_t* dest2);
void dii_power_on(uint8_t io_offset, uint8_t drive_no);
void dii_power_off(uint8_t io_offset);
void dii_head_reposition(uint8_t io_offset, uint8_t cur_track, uint8_t dest_track);

/**
 * Patch the dii_write_sector routine to change the memory addresses used.
 * buf2 and buf6 must start at the beginning of a memory page, nibtab must fit completely inside a page.
 */
void dii_patch_write(uint8_t* buf6, uint8_t* buf2, uint8_t *nibtab);

/**
 * This routine requires the decoding mapping table to be initialized beforehand at
 * DECODING_MAPPING_TABLE_DEFAULT_ADDRESS, and uses space in page 3 as a buffer
 *
 * If the return value is 0, the read failed
 */
uint8_t dii_read_sector(uint8_t io_offset, uint8_t track, uint8_t sector, uint8_t *buffer, uint8_t aonly);

/**
 * Writes gcr 6+2 encoded data to the chosen sector. The track number is used to verify that we're on the correct
 * track before writing. This routine does not move the head.
 * The data must be pre-encoded.
 *
 * By default, it writes 86 bytes from the "twos" buffer located at 0x9C00, 256 bytes of "sixes" from the buffer
 * at 0x9D00 and using a 63 entries translation table preloaded at 0x9C56.
 * If these addresses need to be changes, use the dii_patch_write routine.
 *
 * If the return value is > 0, the write failed
 */
uint8_t dii_write_sector(uint8_t io_offset, uint8_t track, uint8_t sector);

#endif /* _DISK2_HEADER_ */