#include <ESP8266WiFi.h>
#include <WiFi64.h>

void welcome() {
  Serial.println();
  Serial.println("CHINWAG COMMUNICATIONS");
  Serial.print("WIFI64 FIRMWARE BUILD ");
  Serial.println(BUILD);
}

void displayHelp() {
  welcome();
  Serial.println("AT COMMAND SUMMARY:"); yield();
  Serial.println("DIAL HOST.....: ATDTHOST:PORT"); yield();
  Serial.println("SPEED DIAL....: ATDSN (N=0-9)"); yield();
  Serial.println("SET SPEED DIAL: AT&ZN=HOST:PORT (N=0-9)"); yield();
  Serial.println("HANDLE TELNET.: ATNETN (N=0,1)"); yield();
  Serial.println("PET MCTERM TR.: ATPETN (N=0,1)"); yield();
  Serial.println("NETWORK INFO..: ATI"); yield();
  Serial.println("HTTP GET......: ATGET<URL>"); yield();
  //Serial.println("SERVER PORT...: AT$SP=N (N=1-65535)"); yield();
  Serial.println("AUTO ANSWER...: ATS0=N (N=0,1)"); yield();
  Serial.println("SET BUSY MSG..: AT$BM=YOUR BUSY MESSAGE"); yield();
  Serial.println("LOAD NVRAM....: ATZ"); yield();
  Serial.println("SAVE TO NVRAM.: AT&W"); yield();
  Serial.println("SHOW SETTINGS.: AT&V"); yield();
  Serial.println("FACT. DEFAULTS: AT&F"); yield();
  Serial.println("PIN POLARITY..: AT&PN (N=0/INV,1/NORM)"); yield();
  Serial.println("ECHO OFF/ON...: ATE0 / ATE1"); yield();
  Serial.println("VERBOSE OFF/ON: ATV0 / ATV1"); yield();
  Serial.println("SET SSID......: AT$SSID=WIFISSID"); yield();
  Serial.println("SET PASSWORD..: AT$PASS=WIFIPASSWORD"); yield();
  Serial.println("SET BAUD RATE.: AT$SB=N (3,12,24,48,96"); yield();
  Serial.println("                192,384,576,1152)*100"); yield();
  Serial.println("FLOW CONTROL..: AT&KN (N=0/N,1/HW,2/SW)"); yield();
  Serial.println("WIFI OFF/ON...: ATC0 / ATC1"); yield();
  Serial.println("HANGUP........: ATH"); yield();
  Serial.println("ENTER CMD MODE: +++"); yield();
  Serial.println("EXIT CMD MODE.: ATO"); yield();
  Serial.println("QUERY MOST COMMANDS FOLLOWED BY '?'"); yield();
}