* Add trending links
* Add overriding specific links trendability
* Add link type to preview cards and only trend articles
Change trends review notifications from being sent every 5 minutes to being sent every 2 hours
Change threshold from 5 unique accounts to 15 unique accounts
* Fix tests
* Add account statuses cleanup policy model
* Record last inspected toot to delete to speed up successive calls to statuses_to_delete
* Add service to cleanup a given account's statuses within a budget
* Add worker to go through account policies and delete old toots
* Fix last inspected status id logic
All existing statuses older or equal to last inspected status id must be
kept by the current policy. This is an invariant that must be kept so that
resuming deletion from the last inspected status remains sound.
* Add tests
* Refactor scheduler and add tests
* Add user interface
* Add support for discriminating based on boosts/favs
* Add UI support for min_reblogs and min_favs, rework UI
* Address first round of review comments
* Replace Snowflake#id_at_start with with_random parameter
* Add tests
* Add tests for StatusesCleanupController
* Rework settings page
* Adjust load-avoiding mechanisms
* Please CodeClimate
* Add account_notes relationship
* Add tests
* Fix owned account notes not being deleted when an account is deleted
* Add post-migration to clean up orphaned account notes
* Change references to tootsuite/mastodon to mastodon/mastodon
* Remove obsolete test fixture
* Replace occurrences of tootsuite/mastodon with mastodon/mastodon in CHANGELOG
And a few other places
* Fix account deletion sometimes failing because of optimistic locks
In some rare occasions[1], deleting accounts would fail with a
`StaleObjectError` exception.
Indeed, account deletion manually sets the `AccountStat` values without
handling cases where the optimistic locking on `AccountStat` would fail.
To my knowledge, with the rewrite of account counters in #15913, the
`DeleteAccountService` is now the only place that changes the counters in
a way that is not atomic.
Since in this specific case, we do not care about the previous values of the
account counters, it appears we don't need locking at all for this table
anymore.
[1]: https://discourse.joinmastodon.org/t/account-cant-be-deleted/3602
* Bump MAX_SUPPORTED_VERSION in maintenance script
Materializing those views can take a while, and they are currently refreshed
anyway each time they are actually used, in the FollowRecommendationsScheduler.
If a status with a hashtag becomes very popular, it stands to
reason that the hashtag should have a chance at trending
Fix no stats being recorded for hashtags that are not allowed
to trend, and stop ignoring bots
Remove references to hashtags in profile directory from the code
and the admin UI
Express follow_recommendations in terms of account_summaries rather than
accounts, integrate filters that are unconditionally used, and materialize
the resulting view.
This should result in the bulk of the computation being performed only once
instead of **once per recommendation language**.
Prevent new accounts from being created using the same underlying
e-mail as a suspended account using extensions and period
permutations. Stores e-mails as a SHA256 hash
* Use ActiveRecord::Result#to_ary instead of deprecated to_hash
They do the same thing, and to_hash has been removed from Rails 6.1
* Explicitly name polymorphic indexes to workaround a bug in Rails 6.1
cf. https://github.com/rails/rails/issues/41693
* Fix incorrect usage of “foreign_key” in migration script
* Use `ActiveModel::Errors#delete` instead of deprecated clear method
* Fix link headers tests on Rails 6.1
Rails 6.1 adds values to the Link header by default, thus it is not a
LinkHeader object anymore. Fix the test to parse the Link header instead
of assuming it is a LinkHeader.
* Prepare Mastodon for zeitwerk autoloader (Rails 6)
Add inflections and rename/move a few classes.
In particular, app/lib/exceptions.rb and app/lib/sanitize_config.rb
were manually loaded while still in autoload paths.
* Add inflection for Url → URL
* Fix old migration script not being able to run if it fails midway
Improve the robustness of a migration script likely to fail because of database
corruption so it can run again once database corruptions are fixed.
* Display a specific error message in case of index corruption
Co-authored-by: Eugen Rochko <eugen@zeonfederated.com>
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
* Add indication to admin UI of whether a report has been forwarded
* Rework how forwarded status is displayed
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* Add UserNote model
* Add UI for user notes
* Put comment in relationships entity
* Add API to create user notes
* Copy user notes to new account when receiving a Move activity
* Address some of the review remarks
* Replace modal by inline edition
* Please CodeClimate
* Button design changes
* Change design again
* Cancel note edition when pressing Escape
* Fixes
* Tweak design again
* Move “Add note” item, and allow users to add notes to themselves
* Rename UserNote into AccountNote, rename “comment” Relationship attribute to “note”
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
This should not be an issue in practice because of the Rails-level uniqueness
check, but local accounts having a NULL domain means the uniqueness constraint
did not apply to them (since no two NULL values are considered equal).
There are no obvious ways it could be misused, as the secret is not
really used for anything, but it is best to secure it for the future
Follow-up to #13613
* Fix PostgreSQL load when linking in announcements
Fixes#13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
* Change ActivityPub follower/following collections to not link first page
* Add support for hiding followers and following of remote users
* Switch to using a single `hide_collections` column
* Address code style remarks
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
Fixes#12690
The `strong_migrations` update from ba2eac8824
introduced a check for `change_column_null` specific to Postgres. This rejects
old migrations.
This commit just wraps old migrations with `safety_assured` to bypass this
check. Alternatives would have been to:
- Disable that check entirely (a possibility added in that same
`strong_migrations` version) for Mastodon, but it makes sense to write new
migrations without such a strong lock.
- Rewrite the old migrations to do it in a way that do not require an exclusive
lock. I thought fixing those old migrations for performance wasn't worth the
pain. Also, if I understand correctly, the next version of
`strong_migrations` is going to include a helper to do that. We could update
those migrations at that point.
* Add backend support for bookmarks
Bookmarks behave like favourites, except they aren't shared with other
users and do not have an associated counter.
* Add spec for bookmark endpoints
* Add front-end support for bookmarks
* Introduce OAuth scopes for bookmarks
* Add bookmarks to archive takeout
* Fix migration
* Coding style fixes
* Fix rebase issue
* Update bookmarked_statuses to latest UI changes
* Update bookmark actions to properly reflect status changes in state
* Add bookmarks item to single-column layout
* Make active bookmarks red
* Add ability to add oneself to lists
* Change search results to include oneself when searching through followers
* Mark follow relation as optional in ListAccount
* Add voters count to polls
* Add ActivityPub serialization and parsing of voters count
* Add support for voters count in WebUI
* Move incrementation of voters count out of redis lock
* Reword “voters” to “people”
* Add soft delete for statuses to allow them to appear instant
* Allow reporting soft-deleted statuses and show them in the admin UI
* Change index for getting an account's statuses
* Add more accurate hashtag search
Using ElasticSearch to index hashtags with edge n-grams and score
them by usage within the last 7 days since last activity. Only
hashtags that have been reviewed and are listable can appear in
searches, unless they match the query exactly
* Fix search analyzer dropping non-ascii characters
* Add database columns for adding notes to domain blocks/restrctions
* Add admin UI to set private and public comments when blocking a domain
* Add text for private and public comments on domain blocks
* Show domain block comments in admin UI
* Add comments to the domain block undo page
* Make UnblockDomainService more robust regarding upgraded domain blocks
* Allow editing domain blocks
* Rename button from “undo domain block” to “view domain block” in account admin UI
* Change test to unsilence silenced users from upgraded blocks
Fix#271
Add back the `GET /api/v1/trends` API with the caveat that it does
not return tags that have not been allowed to trend by the staff.
When a hashtag begins to trend (internally) and that hashtag has
not been previously reviewed by the staff, the staff is notified.
The new admin UI for hashtags allows filtering hashtags by where
they are used (e.g. in the profile directory), whether they have
been reviewed or are pending reviewal, they show by how many people
the hashtag is used in the directory, how many people used it
today, how many statuses with it have been created today, and it
allows fixing the name of the hashtag to make it more readable.
The disallowed hashtags feature has been reworked. It is now
controlled from the admin UI for hashtags instead of from
the file `config/settings.yml`
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Add support for an instance actor
* Skip username validation for local Application accounts
* Add migration script to create instance actor
* Make Codeclimate happy
* Switch to id -99 for instance actor
* Remove unused `icon` and `image` attributes from instance actor
* Use if/elsif/else instead of return + ternary operator
* Add instance actor to fresh installs
* Use instance actor as instance representative
Use instance actor for forwarding reports, relay operations, and spam
auto-reporting.
* Seed database in test environment
* Fix single-user mode
* Fix tests
* Fix specs to accomodate for an extra `Account`
* Auto-reject follows on instance actor
Following an instance actor might make sense, but we are not handling that
right now, so auto-reject.
* Fix webfinger lookup and serialization for instance actor
* Rename instance actor
* Make it clear in the HTML view that the instance actor should not be blocked
* Raise cache time for instance actor as there's no dynamic content
* Re-use /about/more with a flash message for instance actor profile
* Add a spam check
* Use Nilsimsa to generate locality-sensitive hashes and compare using Levenshtein distance
* Add more tests
* Add exemption when the message is a reply to something that mentions the sender
* Use Nilsimsa Compare Value instead of Levenshtein distance
* Use MD5 for messages shorter than 10 characters
* Add message to automated report, do not add non-public statuses to
automated report, add trust level to accounts and make unsilencing
raise the trust level to prevent repeated spam checks on that account
* Expire spam check data after 3 months
* Add support for local statuses, reduce expiration to 1 week, always create a report
* Add content warnings to the spam check and exempt empty statuses
* Change Nilsimsa threshold to 95 and make sure removed statuses are removed from the spam check
* Add all matched statuses into automatic report
* Record account suspend/silence time and keep track of domain blocks
* Also unblock users who were suspended/silenced before dates were recorded
* Add tests
* Keep track of suspending date for users suspended through the CLI
* Show accurate number of accounts that would be affected by unsuspending an instance
* Change migration to set silenced_at and suspended_at
* Revert "Also unblock users who were suspended/silenced before dates were recorded"
This reverts commit a015c65d2d1e28c7b7cfab8b3f8cd5fb48b8b71c.
* Switch from using suspended and silenced to suspended_at and silenced_at
* Add post-deployment migration script to remove `suspended` and `silenced` columns
* Use Account#silence! and Account#suspend! instead of updating the underlying property
* Add silenced_at and suspended_at migration to post-migration
* Change account fabricator to translate suspended and silenced attributes
* Minor fixes
* Make unblocking domains always retroactive
* Add blurhash
* Use fallback color for spoiler when blurhash missing
* Federate the blurhash and accept it as long as it's at most 5x5
* Display unknown media attachments as blurhash placeholders
* Improve style of embed actions and spoiler button
* Change blurhash resolution from 3x3 to 4x4
* Improve dependency definitions
* Fix code style issues
* Add "why do you want to join" field to invite requests
Fix#10512
* Remove unused translations
* Fix broken registrations when no invite request text is submitted
* create account_identity_proofs table
* add endpoint for keybase to check local proofs
* add async task to update validity and liveness of proofs from keybase
* first pass keybase proof CRUD
* second pass keybase proof creation
* clean up proof list and add badges
* add avatar url to keybase api
* Always highlight the “Identity Proofs” navigation item when interacting with proofs.
* Update translations.
* Add profile URL.
* Reorder proofs.
* Add proofs to bio.
* Update settings/identity_proofs front-end.
* Use `link_to`.
* Only encode query params if they exist.
URLs without params had a trailing `?`.
* Only show live proofs.
* change valid to active in proof list and update liveness before displaying
* minor fixes
* add keybase config at well-known path
* extremely naive feature flagging off the identity proof UI
* fixes for rubocop
* make identity proofs page resilient to potential keybase issues
* normalize i18n
* tweaks for brakeman
* remove two unused translations
* cleanup and add more localizations
* make keybase_contacts an admin setting
* fix ExternalProofService my_domain
* use Addressable::URI in identity proofs
* use active model serializer for keybase proof config
* more cleanup of keybase proof config
* rename proof is_valid and is_live to proof_valid and proof_live
* cleanup
* assorted tweaks for more robust communication with keybase
* Clean up
* Small fixes
* Display verified identity identically to verified links
* Clean up unused CSS
* Add caching for Keybase avatar URLs
* Remove keybase_contacts setting
* Add polls
Fix#1629
* Add tests
* Fixes
* Change API for creating polls
* Use name instead of content for votes
* Remove poll validation for remote polls
* Add polls to public pages
* When updating the poll, update options just in case they were changed
* Fix public pages showing both poll and other media
* Add hashtag filter to profiles
GET /@:username/tagged/:hashtag
GET /api/v1/accounts/:id/statuses?tagged=:hashtag
* Display featured hashtags on public profile
* Use separate model for featured tags
* Update featured hashtag counters on-write
* Limit featured tags to 10
* Add Tombstone model to remember object deletion
* Do not recreate a status if it has been deleted
* Record Tombstone for remote deleted items
Also, only record deleted items from same-host actors
* Clear an user's tombstones when their key change
* Add REST API for creating an account
The method is available to apps with a token obtained via the client
credentials grant. It creates a user and account records, as well as
an access token for the app that initiated the request. The user is
unconfirmed, and an e-mail is sent as usual.
The method returns the access token, which the app should save for
later. The REST API is not available to users with unconfirmed
accounts, so the app must be smart to wait for the user to click a
link in their e-mail inbox.
The method is rate-limited by IP to 5 requests per 30 minutes.
* Redirect users back to app from confirmation if they were created with an app
* Add tests
* Return 403 on the method if registrations are not open
* Require agreement param to be true in the API when creating an account
* Add moderation warnings
Replace individual routes for disabling, silencing, and suspending
a user, as well as the report update route, with a unified account
action controller that allows you to select an action (none,
disable, silence, suspend) as well as whether it should generate an
e-mail notification with optional custom text. That notification,
with the optional custom text, is saved as a warning.
Additionally, there are warning presets you can configure to save
time when performing the above.
* Use Account#local_username_and_domain
* Make custom emoji domains case sensitive #9351
* Fixup style in downcase_domain to comply with codeclimate.
* switch if! to unless
* Don't use transactions, operate in batches.
Also revert spurious schema change.
* fix: change Identity's id column to a bigint
This appears to be the last model created using a 5.0 migration,
where column types defaulted to `integer` rather than `bigint`.
This migration changes the column type to match that of all of the
other ID columns.
* Change user_id column in identities to bigint and fix down-migration
* Add locality check to ActivityPub::FetchRemoteAccountService
Fix#8643
Because there are a few places where it is called, it is difficult
to confirm if they all previously checked it for locality. It's better
to make sure within the service.
* Remove faux-remote duplicates of local accounts
* Add silent column to mentions
* Save silent mentions in ActivityPub Create handler and optimize it
Move networking calls out of the database transaction
* Add "limited" visibility level masked as "private" in the API
Unlike DMs, limited statuses are pushed into home feeds. The access
control rules between direct and limited statuses is almost the same,
except for counter and conversation logic
* Ensure silent column is non-null, add spec
* Ensure filters don't check silent mentions for blocks/mutes
As those are "this person is also allowed to see" rather than "this
person is involved", therefore does not warrant filtering
* Clean up code
* Use Status#active_mentions to limit returned mentions
* Fix code style issues
* Use Status#active_mentions in Notification
And remove stream_entry eager-loading from Notification
* Add conversations API
* Add web UI for conversations
* Add test for conversations API
* Add tests for ConversationAccount
* Improve web UI
* Rename ConversationAccount to AccountConversation
* Remove conversations on block and mute
* Change last_status_id to be a denormalization of status_ids
* Add optimistic locking
Adopted from GitLab CE. Generate new migration with:
rails g post_deployment_migration name_of_migration_here
By default they are run together with db:migrate. To not run them,
the env variable SKIP_POST_DEPLOYMENT_MIGRATIONS must be set
Code by Yorick Peterse <yorickpeterse@gmail.com>, see also:
83c8241160
Include a dummy Account class in the migration script containing only the
attributes relevant to the migration in order to not rely as much on the
codebase being in sync with the database schema.
* Add keyword filtering
GET|POST /api/v1/filters
GET|PUT|DELETE /api/v1/filters/:id
- Irreversible filters can drop toots from home or notifications
- Other filters can hide toots through the client app
- Filters use a phrase valid in particular contexts, expiration
* Make sure expired filters don't get applied client-side
* Add missing API methods
* Remove "regex filter" from column settings
* Add tests
* Add test for FeedManager
* Add CustomFilter test
* Add UI for managing filters
* Add streaming API event to allow syncing filters
* Fix tests
* Wrong exception class: ActiveRecord::RecordNotUnique, not PG::UniqueViolation
It's completely not obvious but PG::UniqueViolation is just a string inside the exception message, not the actual class of the exception
* Favourite does not have target_account_id
* Improve account index migration
- Display more progress in stdout
- Catch PG::UniqueViolation when re-attributing favourites
- Skip callbacks and validations when re-attributing other relationships
* Use in_batches to reduce table lock-up during account merge
* Use #say_with_time to benchmark each deduplication
Queries with the combination of account_id, id, and visibility can be
categorized in three types:
1. Querying for public and unlisted to enumerate statuses visible to
anyone.
2. Querying for public, unlisted, and private to enumerate statuses
visible to follower.
3. Querying for direct to enumerate own direct statuses.
1 and 2 is covered by the index with condition 'visibility IN (0, 1, 2)'.
It would bring better performance in case that there are many direct
statuses.
The index with condition 'visibility = 3' is just for 3. It would be much
faster to query direct statuses thanks to this query.
The total size of those two indexes are expected to be smaller than the
deleted one because they are partial and does not have to cover all the
table.
- POST /api/v1/push/subscription
- PUT /api/v1/push/subscription
- DELETE /api/v1/push/subscription
- New OAuth scope: "push" (required for the above methods)
Same URI passed between follow request and follow, since they are
the same thing in ActivityPub. Local URIs are generated during
creation using UUIDs and are passed to serializers.
* Add bio fields
- Fix#3211
- Fix#232
- Fix#121
* Display bio fields in web UI
* Fix output of links and missing fields
* Federate bio fields over ActivityPub as PropertyValue
* Improve how the fields are stored, add to Edit profile form
* Add rel=me to links in fields
Fix#121
* Implement Assignment of Reports (#6967)
* Change translation of admin.report.comment.label to "Report Comment" for clarity
As we'll soon add the ability for reports to have comments on them, this clarification makes sense.
* Implement notes for Reports
This enables moderators to leave comments about a report whilst they work on it
* Fix display of report moderation notes
* Allow reports to be reopened / marked as unresolved
* Redirect to reports listing upon resolution of report
* Implement "resolve with note" functionality
* Add inverse relationship for report notes
* Remove additional database querying when loading report notes
* Fix tests for reports
* Fix localisations for report notes / reports
* Fix#201: Account archive download
* Export actor and private key in the archive
* Optimize BackupService
- Add conversation to cached associations of status, because
somehow it was forgotten and is source of N+1 queries
- Explicitly call GC between batches of records being fetched
(Model class allocations are the worst offender)
- Stream media files into the tar in 1MB chunks
(Do not allocate media file (up to 8MB) as string into memory)
- Use #bytesize instead of #size to calculate file size for JSON
(Fix FileOverflow error)
- Segment media into subfolders by status ID because apparently
GIF-to-MP4 media are all named "media.mp4" for some reason
* Keep uniquely generated filename in Paperclip::GifTranscoder
* Ensure dumped files do not overwrite each other by maintaing directory partitions
* Give tar archives a good name
* Add scheduler to remove week-old backups
* Fix code style issue
Migration is wrapped by transaction, so manual `commit_db_transaction` without transaction restarting causes "there is no transaction in progress" warnings. We should use `disable_ddl_transaction!` instead, if we can omit transaction completely.
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
We added an index for `[account_id, reblog_of_id]`, but we already have a similar index for `reblog_of_id`. Those index will be bigger according to statuses count. For example, `reblog_of_id` index uses 800MB for 10GB statuses table.
So this patch swaps indexed columns like `[reblog_of_id, account_id]`, then it will covers both usage with single index.
Since those index creation may take a while, I've also disabled previous index creation.
* Add consumable invites
* Add UI for generating invite codes
* Add tests
* Display max uses and expiration in invites table, delete invite
* Remove unused column and redundant validator
- Default follows not used, probably bad idea
- InviteCodeValidator is redundant because RegistrationsController
checks invite code validity
* Add admin setting to disable invites
* Add admin UI for invites, configurable role for invite creation
- Admin UI that lists everyone's invites, always available
- Admin setting min_invite_role to control who can invite people
- Non-admin invite UI only visible if users are allowed to
* Do not remove invites from database, expire them instantly
* Serialize moved accounts into REST and ActivityPub APIs
* Parse federated moved accounts from ActivityPub
* Add note about moved accounts to public profiles
* Add moved account message to web UI
* Fix code style issues
